R910e, Before you operate the monitor – Rosewill R910E User Manual
Page 5
R910E
4
The following symptoms are normal with LCD monitor and do not indicate a
problem.
NOTES
•
Due to the nature of the fluorescent light, the screen may flicker during
initial use. Turn off the Power Switch and then turn it on again to make
sure the flicker disappears.
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
•
The LCD screen has effective pixels of 99.99% or more. It may include
blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the
time.
•
Due to the nature of the LCD screen, an afterimage of the previous screen
may remain after switching the image, when the same image is displayed
for hours. In this case, the screen is recovered slowly by changing the
image or turning off the Power Switch for hours.
BEFORE YOU OPERATE THE MONITOR
FEATURES
•
48cm(19”) TFT Color LCD Monitor
•
Crisp, Clear Display for Windows
•
Recommened Resolutions: 1280 X 1024 @ 60Hz
•
EPA
E
NERGY
S
TAR
®
•
Dual Input (DVI + Analog)
•
2W+2W
Stereo
Speakers
•
Space Saving, Compact Case Design
The product package should include the following items:
1. LCD
Monitor
2. 15-pin D-Sub Cable
3. DVI
Cable
4. Power
Cord
5. PC Stereo Cable
6. External Power Adapter
7. Driver
Disk
8. Quick Start Guide (QSG)
9. Warranty, Notices, Warnings & Precautions Booklet
9. Input Not Supported Solution Sheet
FEATURES
CHECKING THE CONTENTS OF THE PACKAGE
SPECIAL NOTES ON LCD MONITORS