Rover Clipper 405606x108A - Manual (Page 15)

OPERATION
15 F 050760L
Figure 5
Throttle Control
Lever
Blade Rotation
Control
Brake Pedal
Lift
Lever
Speed Control
Pedal
LOCATION OF CONTROLS
BLADE ROTATION CONTROL:
Use the blade rotation
control to start and stop the rotation of the blade.
BRAKE PEDAL:
Use the brake pedal to quickly stop.
HEADLIGHT SWITCH:
The headlight switch is the first part
of the ignition switch. To use the lights with the engine running, turn
the key to the position for the lights.
IGNITION SWITCH:
Use the ignition switch to start and stop
the engine.
AUTOMATIC DRIVE DISCONNECT:
Use the auto-
matic drive disconnect, located under the seat, to disengage the
transmission.
LIFT LEVER:
Use the lift lever to change the height of cut.
PARKING BRAKE LEVER:
Use the parking brake lever
to engage the brake when you leave the unit.
SPEED CONTROL PEDAL:
Use the speed control lever
to change the speed and the direction of the unit.
THROTTLE CONTROL LEVER:
Use the throttle control
lever to increase or decrease the speed of the engine.