Rosewill RCX-Z4 - Manual (Page 5)

Stick the protective insulated
film onto the back of the heatsink
retention brackets.
3
4
O
Apply the proper amount of
thermal compound on the CPU
surface, a thin film is ideal, extra
thermal compound will not
improve performance.
Make sure the CPU surface is
perfectly clean.
FOR AMD K8
Place the RCX-Z4 on the top of the CPU, align two holes ( shown in red
as the picture below ) of heatsink retention bracket with the Motherboard holes.
Using the K8 screws with
spring inserted, screwing
down into the motherboard
backplate.
I
H
D
4
user manual COOLER RCX-Z4