Radio Shack CD-3445 - Manual (Page 7)

7
USING VEHICLE
BATTERY POWER
You can power your CD player from
your vehicle’s battery power using a 6-
volt DC adapter such as Cat. No. 270-
1563.
Caution: The recommended DC
adapter supplies regulated 6 volts and
delivers at least 600 milliamps. Its
white adaptaplug correctly fits the CD
player’s
DC 6V jack and you can set its
center tip to positive. Using an adapter
that does not meet these specifications
could seriously damage the CD player
or the adapter.
Follow these steps to connect your CD
player to your vehicle’s battery power.
1. Insert the white adaptaplug into
the adapter’s wire socket so TIP
and
+
line up.
2. Insert the DC adapter’s barrel
plug into the CD player’s DC 6V
jack.
3. Plug the other end of the adapter
into your vehicle’s cigarette-lighter
socket.
Note: When you connect a DC adapt-
er, the CD player automatically switch-
es to external power, even if batteries
are installed.
(illus)
42-5056.fm Page 7 Thursday, August 12, 1999 9:25 AM