Regent Sheffield HSL300 - Manual (Page 2)

2
Congratulations! You have purchased a Regent 300 watt halogen shop
light which will provide you with years of trouble-free service. This light has
been designed to provide instant on, pure white light in a workshop, garage,
basement or any place where an intense bright area light is needed.
What you need
• Screwdriver
• (2) Toggle bolts if mounted into drywall only
What’s included
• Fully assembled fixture with mounting chains (A)
• (2) “J” Screw hooks (B)
• (2) 150 watt premium halogen bulbs (C)
• String switch chain extension (D)
• (2) Wire safety guards/lenses (E)
What to know
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK,
EXPOSURE TO EXCESSIVE UV RADIATION OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS.
WARNING: To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO
EXCESSIVE UV RADIATION OR INJURY TO PERSONS:
• Lighted lamp is HOT!
• Do not remain in light if skin feels warm.
• For indoor use only.
• UL and CSA listed for dry locations.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other
connection voids warranty.
• Keep away from flammable objects.
• The bulb and fixture get extremely hot during use. Always
unplug the light and let it cool 5 minutes before attempting to
touch the fixture.
• Do not touch hot lens, guard, or enclosure.
• Bulb gets HOT quickly! Only contact switch/plug when turning on.
• The electrical system, and the method of electrically connecting the fixture
to it, must be in accordance with the National Electrical Code and local
building codes.
• Do not operate the unit with a missing or damaged wire safety guard, safety
glass lens (lamp containment), or UV filter.
• Do not direct the light at persons or look directly at lighted fixture.
• Use only with a 150 watt or smaller bulb. Installing a bulb of a higher
wattage could create a fire hazard. Use of higher wattage bulb will void the
warranty.
A
E
HSL300
CHSL300
C
D
B