Rival BD275 User Manual
Page 5
-5-
• Before the BUFFET RANGE is used for the first time, it should be
heated up at maximum setting for approximately 4 minutes without
a pot. During this curing process, the protective coating is hardened
and obtains its maximum strength.
• The BUFFET RANGE may smoke the first time it is used – it is not
defective and the smoke will burn off within a few minutes.
• Do not leave the unit ON without any pots/pans on the Solid
Burners after the curing process.
• Do not use as a portable heater.
• Make sure the power supply cord does not touch hot elements or
cooking utensils.
• For daily cooking, wipe excess water/condensation off pots, lids and
utensils prior to use.
• Make sure that hot pots/pans do not touch the HOUSING UNIT –
these could damage the surface finish.
IMPORTANT POINTS TO REMEMBER WHEN OPERATING
3. When using a pot or pan, place it in the center of the burner. It is
recommended that you use a pot or pan that is the same size as the
burner.
4. When cooking is complete turn Temperature Control Dial(s) to the
OFF position.
5. When not in use, unplug unit to assure that it is off. This helps prevent
accidental burns.