RUSSELL HOBBS 17 Litre Piano Black Microwave Oven RHM1714B - Manual (Page 8)

Connect the main plug into a suitable 13amp mains socket, make sure the voltage is the
same as on the rating label (do not use extension cables or mains socket adaptors).
The microwave oven will beep once and the display will show the clock symbol and
'1:01'.
Note: during any of the following cooking programs, to pause cooking, press the
'Stop/Cancel' button. To stop cooking, press the 'Stop/Cancel' button again.
Setting the clock (24 hour)
Before setting a cooking program the clock needs to be set. For example, if you want to
set the time to 08:30.
1. Press the 'Clock' button. The display will show '24H', and the clock symbol will be
displayed.
2. Turn the 'Time/Menu.' knob clockwise until the display shows '8:'. The clock
symbol will start to flash.
3. Press the 'Clock' button. The display will show '8:00' and the clock symbol will
continue to flash.
4. Turn the 'Time/Menu' knob clockwise until the display shows '08:30'. Press the
'Clock' button to confirm. To clock is now set, the ':' symbol will continue to flash
and the 'Clock' symbol will stay lit.
Microwave cooking(Cooking times between 10 seconds and 60 minutes)
Press the 'Power' button a number of times to choose a cooking power level, then turn
the 'Time.Menu.' knob clockwise to choose the time. Press the 'Time.Menu.' knob to
start cooking.
You can microwave food using 6 settings:
Press the power button Cooking power
Once 100% (High)
Twice 80% (Medium high)
Three times 60% (Medium)
Four times 40% (Medium low)
Five times 20% (Low)
Six times 0% (Used as a kitchen timer)
For example; if you want to microwave food for 20 minutes at 60% microwave power:
1. Place the food in a container suitable for use with microwave ovens and put it
into the microwave oven.
2. Press the 'Power' button three times. The display will show '60%', the symbols
'Microwave' and 'Power level' symbol will light up
3. Turn the 'Time/Menu' knob clockwise knob to set the time until the display shows
'20:00'. The 'Start' symbol will flash and the '1s' will light up.
Operation instructions
7