Raymarine Ray48 - Manual (Page 30)

24
CH
No.
Use
XMIT RCV Single
Frequency
x
x
x
x
157.075 U.S. Government only - Environmental protection operations.
U.S. Government only
U.S. Government only
Public Correspondence (Marine Operator)
Public Correspondence (Marine Operator) 81 A
82 A
83 A
84
85
157.125
157.175
157.075
157.125
157.175
157.225
157.275 161.825
161.875
Public Correspondence (Marine Operator)
Public Correspondence (Marine Operator)
Commercial, Intership only 86
87
88
A
157.325
157.375
157.425
157.425
161.925
161.975
x
x
x
x
x
x
x
x
x
x Non-Commercial
Non-Commercial (Intership only)
Port Operations
Port Operations 71
72
73
74 156.575
156.625
156.675
156.725
CH 16 Guard Band. RX only.
CH 16 Guard Band. RX only.
Port Operations (Intership only)
Non-Commercial
Commercial. Non-Commercial in Great Lakes only.
Commercial. Non-Commercial in Great Lakes only. 75
76
77
78
A
79 A
80 A
- -
- -
156.875
156.925
156.975
157.025
156.575
156.625
156.675
156.725
156.775
156.825
156.875
156.925
156.975
157.025
x
x
x
x
x Port Operations
Commercial. Used for Bridge-to-bridge communications in
lower Mississippi River. Intership only. 66 A
67
156.325
156.375
Non-Commercial
Non-Commercial
Digital Selective Calling (voice communications not allowed) 68
69
70 156.425
156.475
156.525
156.325
156.375
156.425
156.475
156.525
4
Table 6-1 (Continued)
Boaters should normally use channels listed as Non-Commercial.
NOTE
1. The letter “A” following a channel number indicates simplex use of the ship
station transmit side of an international duplex channel. Operations are
different from that of international operations on that channel.
2. Channels 13 should be used to contact a ship when there is danger of collision.
All ships of length 20 meters or greater are required to guard VHF channel 13,
in addition to VHF channel 16, when operating within U.S. territorial waters.
3. Channel 16 is used for calling other stations or for distress alerting.
4. Channel 13 and 67 are 1 Watt initially.
User can override to high power (25 Watts) via front panel controls.
5. The transmitter is automatically disabled when channels 1, 2, 3 and 4 are
selected.
6. Channels 75 and 76 are receive-only. Transmission on these channels has been
disabled as a precaution to avoid harmful interference to channel 16.
CAUTION
Operation on channels not designated for use by your classification of craft or on
International Channels within the US territorial waters is a violation of FCC
Rules and Regulations and way result in severe penalties.