Close down procedure, Draining the water heater, About your water heater – Rheem GAS DOMESTIC OUTDOOR WATER HEATER User Manual

Page 29: Lighting the water heater

Advertising
background image

LIGHTING THE WATER HEATER

29

CLOSE DOWN PROCEDURE

1. Turn the gas control knob to the

·” position (pilot). This setting will

leave the pilot flame alight however
the main burner will not be able to
light.

2. Turn the gas control knob to the

"

z" (off) position. This setting shuts

the gas control down completely.




DRAINING THE WATER HEATER


To drain the water heater:

Turn off the water heater (refer to

“To Turn Off The Water Heater”

on

page 25).

Close all hot water taps.

Operate the relief valve release lever - do not let the lever snap back or you
will damage the valve seat.

Operating the lever will release the pressure in the water heater.

Undo the union at the cold water inlet to the water heater and attach a hose
to the water heater side of the union.

Let the other end of the hose go to a drain.

Operate the relief valve again.

This will let air into the water heater and allow the water to drain through the
hose.


Advertising