Rangemaster RC90 - Manual (Page 14)

12
INSTALLATION
Check the appliance is electrically safe when you have finished.
Electrical Connections
This appliance must be installed by a qualified electrician
to comply with the relevant Institute of Electrical
Engineers (I.E.E.) regulations and also the local electricity
supply company requirements.
 WARNING: THIS APPLIANCE MUST BE EARTHED
Note: All external wiring must comply with the IEE
Regulations for the Electrical Equipment of Buildings.
Connection to the electrical supply can be made with either
a plug and socket, or be permanently wired via a double pole
switch. The hob is supplied with a 3-core cable, 2m long.
If a replacement cable is fitted it must be 250V high
temperature PVC (85°C), 1mm²
minimum conductor size.
Connect the hob up as shown (Fig.5-5).
IMPORTANT: The wires in the mains lead are coloured in
accordance with the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
Hob Check
Check each cooking zone in turn.
Customer Care
Please complete your contact details in the front of this
section. Please inform the user how to operate the hob and
hand over the instruction pack.
Thank you.
ArtNo.317-0017 Connection box
L N E
Fig.5-5
�������
������� ���������
�����
������
�������
���
������� ���������
�����
���
�����
�����
Fig.5-4