Roberts Radio CD9925 User Manual

Page 13

Advertising
background image

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Programmed play

By programming the player you can play up to 21 tracks in any desired
order.

1. Whilst the CD is in STOP, press the Mode button. The Programme

indicator will start to flash and the display will show ‘01’.

2. Select the first track using the Next or Previous buttons. The track

number flashes on the display and the Programme indicator lights
up. Store this track by pressing the Mode button.

3. The Programme indicator will flash and the display will show ‘02’.

4. Repeat the above steps until you have completed your program.

Press the Play/Pause button to commence play of the selected
tracks.

Erasing a programme

1. Whilst the CD is in STOP, press the Mode button. The Programme

indicator will flash.

2. Press the Stop button to cancel the programme. Programmes are

also erased by:- Opening the CD door, moving the Function switch
to the 'Tape/Off' or 'Radio' positions and if the power supply is
interrupted in any way.

12

Checking a programme

1. Whilst the CD is in STOP, press the Mode button. The Programme

indicator will flash

2. Press the Play/Pause button to start playback of the programme.

3. Repeatedly press and release the Next button to step through the

programme. The display will show the programmed track numbers
and playback of the track will start.

Advertising