RCA VR538 - Manual (Page 13)

11
Setting Up the VCR
Startup
10. Set the time and date.
When you first turn on the VCR, --:-- appears in the clock area of
the VCR’s display panel.
A. Press MENU•PROG on remote to display the VCR MAIN
MENU on the TV screen.
B. Press 6 to display SET VCR CLOCK.
C. Enter the time and date with the number buttons on the
remote.
• Press 0 before single-digit numbers.
Example: press 0, then 5, then 0, then 7 for a time
of 5:07. Press 1 for AM or 2 for PM.
• Press CLEAR on the remote to change incorrect entries.
D. Press MENU•PROG on remote to remove SET VCR CLOCK
from the TV screen and start the clock.
E. Press 0 to exit the menu system.
The time will appear in the VCR’s display panel and the time
and date will appear on the TV screen whenever you press
DISPLAY.
VCR SLP
VCR MAIN MENU
1 VCR Plus+ Programming
2 Timer Programming
3 Review Programs
4 Channel Setup
5 VCR Setup Options
6 Set VCR Clock 1 VCR Plus+ Programming
SET VCR CLOCK
Time --:--
(hh:mm)
Date --/--/--
Press MENU to exit