RCA T25208 - Manual (Page 11)

Chapter 1 9
Connections & Setup
Plug in the TV/VCR
Plug the end of the power cord into the wall outlet. Match the wide blade of the plug with the
wide slot in the outlet. Insert the plug completely into the outlet.
Put Batteries in the Remote
1. Remove the battery compartment cover on the remote.
2. Insert new batteries. Match the polarities (+ and -) on the batteries with the
diagram on the remote.
3. Put the battery compartment cover back on the remote.
Turn on the TV/VCR
Press POWER on front of the TV/VCR or press ON•OFF on the remote. The
POWER indicator on the front of the TV/VCR will light when the TV/VCR is on.
Set the Language (Escoja un idioma/Choisissez une
langue)
Your TV automatically displays the Language Menu when you press MENU for
the first time. Follow these steps to change the language:
1. Press the up or down arrow button to choose between English, Spanish and
French, then press ENTER to select the language.
2. Press MENU twice to return to normal TV viewing.
M E N U
TIMER REC SET
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
〈
+/–/ENTER/MENU
〉
+
-
TRACKING
Use the arrow buttons and the
ENTER button to move through
the menu system.
TV/VCR Setup
To complete the TV/VCR setup press MENU to display the MENU. The SYSTEM
SET-UP menu appears for you to set the clock. Once you have set the clock,
there are several other steps you must complete in order to customize your
TV/VCR, such as setting channels and signal type. Complete the following steps
to setup your TV/VCR correctly.