RCA VR337 - Manual (Page 25)

23
References
Location of Controls
Back Panel
3CH.4 Switch
Selects the channel to which you tune the TV to see
the VCR picture if you connect the VCR using one
of the basic hookups.
IN FROM ANT. (Antenna) Connector
Receives a signal from an antenna or cable system
when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO1 IN and AUDIO1 IN Jacks
Receive signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use
INPUT (or channel 00) on the remote
to select.
VIDEO1 OUT and AUDIO1 OUT Jacks
Send signals from VCR to another component like
a VCR or camcorder when it is connected to
these jacks.
OUT TO TV
IN FROM
ANT.
VHF/UHF
3 CH. 4
IN
AUDIO1 VIDEO1
IN OUT OUT
POWER Indicator
Lights when the VCR is turned on.
RECORD Indicator
Lights when the VCR is recording.
TIMER Indicator
Shows VCR is set for timer recording when VCR is
turned off.
Flashes when the clock is not set.
Flashes when a timer recording is set and there is
no cassette in the VCR.
POWER VCR TIMER RECORD
Display Panel
VCR Indicator
Lights when using the TV•VCR button.
When using one of the basic hookups:
• The picture is coming from the VCR when the
VCR indicator is on.
• The picture is coming from the television
channels when the
VCR indicator is off.