Radio Shack TRC-401 - Manual (Page 6)

6
To remove the antenna from your ve-
hicle, grasp the base and then firmly
“peel” it up and off the vehicle’s sur-
face.
Caution: Never slide the antenna’s
magnetic base across your vehicle’s
painted surface. Dust and dirt parti-
cles might scratch your vehicle’s fin-
ish.
CONNECTING POWER
Follow these steps to power the CB
from your vehicle’s battery.
1. Plug the barrel plug of the sup-
plied power cord into DC 12V on
the bottom of the CB.
2. Ensure the cigarette-lighter plug
cap is tightly screwed onto the
plug and insert the plug into the
cigarette-lighter socket.
Notes:
• If the CB does not operate prop-
erly, check that the lighter socket
is clean and free of ashes or
other debris.
• If the CB still does not work,
check the fuse in the power cord
(see “Replacing the Power
Cord’s Fuse” on Page 14).
21-1588.fm Page 6 Thursday, August 5, 1999 10:05 AM