Ryobi HT230 - Manual (Page 9)

9
FEATURES
KNOW YOUR ROTARY TOOL KIT
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
CLEANING BRUSH
Use the cleaning brush to quickly clean the workpiece, rotary
tool, and accessories.
DIGITAL DISPLAY
The speed of the tool is conveniently shown on the digital
display.
FLEX SHAFT
A flexible shaft can be connected to the rotary tool for
working in hard to reach areas and for better control during
delicate work.
PLUNGE CUTTING ACCESSORY
The plunge cutting accessory attaches to the end of the
rotary tool. Depth of cut can be adjusted in 1/8 in. increments
up to 1 in.
SPEED CONTROL BUTTONS
The speed control buttons allow you to easily select tool
speed.
TELESCOPING TOOL HANGER
The telescoping tool hanger provides a convenient place to
hang the rotary tool while the flex shaft is in use.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Rotary Tool
Accessories (See Accessory Chart)
Case
Locking Key
Wrench
Cleaning Brush
Plunge Cutting Accessory
Collet (4)
Telescoping Tool Hanger
Flex Shaft
Tool Hanger Clamp-on Base
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed
this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.