Radio Shack Wildview STC-TGL2M User Manual
Page 7
Wildview Series
www.wildviewcam.com Toll Free 888-304-6125
7
NOTE: Always have camera in the OFF position when
installing or removing batteries.
Batteries “C” cell
The internal battery compartment accepts 4 “C” cell
batteries. Be sure to use high quality brand name
alkaline batteries. Install batteries with correct polarity
(+/-) as noted inside the battery compartment.
12V Lead Acid external battery
The Wildview Scouting Camera is equipped with an
external power jack designed to accept a barrel plug
cable to attach to a sealed lead acid battery. (sold
separately). Battery cable and complete 12V Lead Acid
battery kits are available wherever Wildview scouting
cameras are sold or call toll free 888-304-6125. Only
Wildview external battery accessories are recommended.
• Insert the battery pack plug into the DC 12V jack at
the bottom of camera housing
• Turn on the camera by sliding the power switch to
PIR position