RCA EZ229HD - Manual (Page 14)

14
Connecting to external devices
Viewing videos on TV
1. Plug in the AV cable (provided) – Insert the single
connector end into the camcorder (AV jack) and
connect the double connector ends to the
corresponding video (yellow) and audio (white)
input jacks on the TV.
2. Turn on the TV and the camcorder.
3. Switch the TV to the selected video input.
•
Refer to your TV manual for instructions.
4. You may play and delete videos viewed on the
TV by using the camcorder buttons.
Recording videos to VHS tape or DVD
1. Plug in the AV cable (provided) – Insert the
single connector end into the camcorder and
connect the double connector ends to
corresponding video (yellow) and audio (white)
inputs of the recording device (VHS or DVD
recorder).
2. Turn on the camcorder and the recording device.
3. Switch recording device to the video input
connected to the camcorder.
• Refer to your user manual of the recording
device for instructions.
4. Start recording of your recording device and
press and hold PLAY/PAUSE on the camcorder
for 3 seconds to play all videos on the camcorder.
For best viewing or recording quality,
use the HDMI connector on the left
panel of the camcorder with an HDMI
cable (Bundle with EZ229HD only).
The default TV output standard is NTSC.
You can switch it to PAL standard by
going to the camcorder menu. Refer to
"Menu settings" for more information.