Ricoh AFICIO MP01 - Manual (Page 137)

SPECIFICATIONS
6-5
SPECIFIC
A
TIONS
Table 6-4. Optional equipment (continued)
Hard Disk Storage capacity: 815 megabytes (MB)
Interface: Enhanced IDE plugs into Printer Controller
Power Source: DC 5V, from Printer Controller
Dimensions (W x D x H): 70 x 100 x 8.45 mm / 2.75" x 3.9" x 0.3"
Network interface Card Required Ethernet or Token Ring card installed in the expansion lnput/
Output (I/O) slot on the printer to connect to an Ethernet or Token Ring
network. ☛ Refer to Network Printer Server User Guide for further
information on the network connection.
Printer Capabilities
This section contains information on the functionality of the printer trays as well
as information and illustrations on the output capabilities of the printer.
Tray Functionality
This section contains information on the functionality of the standard output
tray, the external output tray, the optional Finisher, and the optional Mailbox.
The standard (top) output tray provides the following functionality:
❐ Face-down only
❐ Simplex or Duplex output
❐ Disk Based Collation (available only when the hard disk is installed).
The External tray provides the following functionality:
❐ Face-up only
❐ Simplex or Duplex output
❐ Disk Based Collation (available only when the hard disk is installed).
The optional Finisher provides the following functionality:
❐ Face-up or Face-down output
❐ Simplex or Duplex output
❐ Disk Based Collation (available only when the hard disk is installed)
❐ Job separation (performed by the jogger mechanism)
❐ Stapling (available only when the hard disk is installed)