RF-Link AWS-5832-VSR - Manual (Page 27)

27
04
27
P - P frames are encoded using information from the previous I or P
frame, and can only be decoded correctly if the previous I / P frame
is available. P frames are smaller than I frames.
„ I Only / IP Only
„ IP - Simple Profile - Medium bit rates for same quality.
I - Highest bit rates for same quality.
**When choosing MJEPG streaming, ONLY support “I Only”
mode
¾ Bit rate Type
„ Constant and Variable bit rates control allows flexibility in
choosing how much bandwidth is available on network and
quality of video required.
¾ Constant Bit rates
„ 3M / 2M / 1.5M / 1M / 750K / 500K / 384K / 256K / 128K / 64K
/ 32K
¾ Variable Bit rates
„ 2 ~ 31 (quality is best in case value is “3”)
¾ Frame per Second.
„ 1 ~ 30
¾ Group Size
„ Adjusts the ration between “I” frames and “P” frames. Lower
the group size, better the quality.
„ 5 / 10/ 15 / 30 / 60
¾ Video Type
„ NTSC / PAL
**System can automatically detect input video signal when clicking “detect” icon