About the volume and tone settings, Cm-30 – Roland CM-30 User Manual

Page 10

Advertising
background image

10

Making the Connections

Using Two CM-30 Speakers for Stereo Playback (Stereo Link)

Stereo playback is enabled simply by connecting two CM-30 units with a single or double audio cables
(phone type). This function is called “Stereo Link.”

Since the CM-30’s mixer section operates in stereo, the L or R channel signal can be output from a
STEREO LINK OUT jack. This means you can enjoy stereo playback by making connections as follows.

Basic (up to five inputs) stereo playback (Connection example 1)

Stereo playback (up to ten inputs) using the mixers of both CM-30 units (Connection example 2)

Example 1

You can connect up to five input sources.

fig.08

Operation

1.

Connect the devices to the L CM-30.

2.

Connect the STEREO LINK OUT R jack on
the L CM-30 and the STEREO LINK IN jack
on the R CM-30.

3.

Turn on both L and R CM-30.

4.

Adjust the volume levels on all devices.

5.

Adjust the R and L CM-30 volume levels
separately using their MASTER knobs.

If you want to connect input sources to the R CM-30

As described in step 1 of example 1, connect the R
side’s STEREO LINK OUT L jack to the L side’s
STEREO LINK IN jack.

Example 2

You can connect up to ten input sources.

fig.09

Operation

1.

Connect the devices to the L and R CM-30.

2.

Connect the STEREO LINK OUT R jack on
the L CM-30 and the STEREO LINK IN jack
on the R CM-30.

3.

Connect the STEREO LINK OUT L jack on
the R CM-30 and the STEREO LINK IN jack
on the L CM-30.

4.

Turn on both L and R CM-30.

5.

Adjust the volume levels on all devices.

6.

Adjust the R and L CM-30 volume levels
separately using their MASTER knobs.

About the Volume and Tone Settings

Adjust the R and L volume levels separately using their MASTER knobs.

You can adjust the equalizer (LOW and HIGH knobs) independently for the L and R sides.

Basically, they should be set to the same positions, but you can adjust each one as necessary to suit the
needs of a particular setup.

*

The STEREO PHONES jack will provide stereo playback of only the sources connected to the local speaker (L or R).

CM-30

L

R

CM-30

STEREO LINK

OUT R

STEREO LINK
IN

CH 1–3

AUX IN

1, 2

CM-30

L

R

CM-30

STEREO LINK
OUT R

STEREO LINK
OUT L

STEREO

LINK IN

STEREO LINK

IN

CH 1–3

AUX IN

1, 2

CH 1–3

AUX IN

1, 2

CM-30_e.book 10 ページ 2004年7月28日 水曜日 午前9時32分

Advertising