Roland FP-5 - Manual (Page 54)

54
Troubleshooting
Case Cause/What to do
No Power
Is the power cord properly connected?
(p. 8)
No Sound
Is the volume level of the FP-5 (p. 10) or
connected device turned all the way
down?
Are headphones plugged in?
Has a plug remained connected to the
Phones jack? (p. 10)
Is the Speaker switch to “ON”? (p. 7)
Is Local Off selected? When Local Control
is set to OFF, no sound is produced by
playing the keyboard. Set Local Control to
“ON”(p. 50).
Is the MIDI Out mode set to “4”? (p. 51)
No Sound (With a
MIDI Device
Connected)
Is the power to all devices turned on?
(p. 48)
Is the MIDI cable connected and plugged
in correctly? (p. 49)
Does the MIDI channel match the
connected instrument? (p. 50)
No Sound From
the Left Side
Is the [Chord Progression] button’s
indicator off? (p. 35)
No sound from the left side is produced if
the [Chord Progression] button’s indicator
is off while the Session Partner is playing.
The Volume of the
Keyboard is Too
Low
Is the volume balance turned all the way
down? (p. 21)
Two Sounds are
Produced When
the Keyboard is
Played
Is the FP-5 in Dual Play? (p. 18)
When the FP-5 is connected to an external
sequencer, set it to the Local OFF mode
(p. 50). Alternatively, set SOFT THRU on
the sequencer to “OFF.”
Not All Sounds Are
Played
The FP-5 has a maximum polyphony of 64
voices. When playing together with a song
or Rhythm along with heavy use of the
damper pedal, the performance data may
exceed the number of available voices, and
as a result, some notes or sounds played on
the keyboard may not sound.
The
accompaniment
sounds when the
keys are played
Is the [Chord Progression] button’s
indicator on? (p. 35)
When the [Chord Progression] button’s
indicator is on, the Session Partner begins
if you finger a keyboard.
The Keyboard or
Song Register or
Pitch is Off
Have you set Transpose? (p. 28)
Are the settings for the Temperament
(p. 45) correct?
Is the setting for Master Tuning correct?
(p. 45)
Is the [Pedal Control] button’s indicator
on?
When the [Pedal Control] button is
illuminated, pitch bend is applied with the
damper pedal. Press the [Pedal Control]
button, getting its indicator goes out.
Rhythm Does Not
Sound
Is the volume balance for the Rhythm
turned all the way down? (p. 33)
Song Doesn’t Play
Back
Does “dEL” appear in the display? (p. 13)
The internal songs cannot be played back
while recorded performance data remains
in the FP-5’s memory. Try playing back the
song after deleting the performance data.
Only the Sound of
a Particular
Instrument in a
Song Does Not
Play
Is Track Mute on? (p. 13)
If the button’s light is out when you hold
down the [Play/Stop] button, the music on
that track is not heard. Press the track
button so the light is illuminated.
Cannot Record
Have you selected which of the Track
Buttons to be recorded? (p. 40)
Tempo of
Recorded Song or
Metronome is Off
When you select for recording an internal
song that features tempo changes, the
tempos of Performances recorded on other
tracks are altered along with these
changes. In addition, the Metronome
tempo is also changed the same way.
Recorded
Performance is
Erased
Performances that have been recorded are
erased when the power for the FP-5 is
turned off. Once erased, Performances
cannot be recovered.
The [Split] button’s
light won’t go out
Is the [Chord Progression] button’s
indicator off? (p. 35)
Case Cause/What to do
FP-5_e.book 54 ページ ２００５年１月２６日 水曜日 午前１０時２２分