Network setup: activeprotocols, Activeprotocols: *all active, Network setup: ip address – Ricoh Aficio AP3200 User Manual
Page 80
Configuring the Printer for the Network
64
3
D
Referring to the following table,
select the menu item appropriate
to the network.
•
' means that this protocol is ac-
tive.
• A blank cell means this protocol
is not active.
*1
TCP/IP
*2
NetWare
*3
AppleTalk
*4
NetBEUI
Note
❒ Do not select protocols that are
not used on the network.
❒ When using Pure IP under Net-
Ware 5, select TCP/IP to be ac-
tive.
A Press {{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} until the fol-
lowing message appears.
Network Setup:
ActiveProtocols
B Press {{{{Enter #}}}}.
The following message appears
on the panel display.
ActiveProtocols:
*All Active
Note
❒ An asterisk (“*”) prefixes the
currently selected item.
C Press {{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} until the pro-
tocol you want to use appears.
D Press {{{{Enter #}}}}.
The actual procedure may differ
depending on the protocol you
use. Follow the appropriate
steps below.
E
If you use TCP/IP, you should as-
sign an IP address to the printer.
Note
❒ To obtain an IP address for the
printer, contact your network
administrator.
❒ The IP address is shown in dot-
ted decimal format on the panel
display.
A Press {{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} until the fol-
lowing message appears.
Network Setup:
IP Address
Menu item on
the panel display
Active Protocol
TCP
NW
AT
NB
All Active
(Default Setting)
'
'
'
'
None
TCP/IP Only
'
NetWare Only
'
TCP/IP & NetW
'
'
ATalk Only
'
TCP/IP & ATalk
'
'
NetWare & ATalk
'
'
TCP & NW &
ATK
'
'
'
NetBEUI only
'
TCP/IP & NB
'
'
NetBEUI & NetW
'
'
TCP & NB & NW
'
'
'
NetBEUI & ATalk
'
'
TCP & NB & ATK
'
'
'
NB & NW & ATalk
'
'
'
TCP/IP
E V F V G V H V J
NetWare
I V J
Apple-
Talk
J
NetBEUI
J