RoyalTek RBT-2300 - Manual (Page 40)

40
output any NMEA message after power ON. You can use G_Mouse
“Enable” button to let the RBT-2300 output the NMEA sentence. If
you need to use RBT-2300 as a G-Mouse, just enable the G_mouse
function then close the “Data Downloader Utility”. Use the
navigation program and set the Com port to 115200.n.8.1
◆
Current Flash Usage
This bar only shows the rough current flash usage status. You
should check the LED to see if the flash is full.
Step 3: User adjustable: Memory Full Option, key in the Time
Interval and G-Mouse Enable/Disable Option
When you done the configuration setup, press the “Set Log
Config.” button to save the setting to the receiver.
Finally, these setting take effect.
7.2.4 Get the Data Logger Data Downloader revision
information
Step1: Change to “About” menu bar