Renesas Emulation Probe for M32C/88 Group M30880T-EPB - Manual (Page 20)

M30880T-EPB User’s Manual 2. Setup
REJ10J0497-0100Z Rev.1.00 January 16, 2005 Page 20 of 100
2.2 Installing the Emulator Debugger
If the OS used in your host machine is Windows XP or 2000, this installation must be executed by a user with administrator
rights. Be aware that users without administrator rights cannot complete the installation.
Install the emulator debugger M3T-PD308F following the procedure described below.
(1) Downloading the M3T-PD308F V.3.20 Release 1
Download the M3T-PD308F V.3.20 Release 1 from the URL below.
http://www renesas.com/eng/mpumcu/upgrades/in_circuit_emulators/pc7501/index.html
(2) Launching
the installer
Start the “setup.exe” program.
(3) Entering the user information
In the “user information” dialog box, enter the user information (contractor, section, contact address, and host machine).
The supplied information will be turned into a format by which technical support will be provided by e-mail.
(4) Selecting
components
In the “component selection” dialog box, select the components you want to install. In this dialog box you can change the
directory in which to install.
(5) Completing the installation
A dialog box will be displayed indicating that setup has been completed. It means that the installation you made is
completed.