Revox M 219 - Manual (Page 4)

M219 room amplifier Re:connect
3
Safety
Please take note of the
information shown on the labels
on the rear of the unit. Housings
should not be removed, in order
to avoid the danger of an
electric shock. Maintenance and
repairs should only be carried
out by qualified personnel.
This symbol warns of
“dangerous voltages” within the
unit. In the case of contact with
the corresponding components,
the level of voltage can cause
an electric shock.
This symbol indicates important
advice for operation and
maintenance in this
documentation.
Installation and operation
Please check the unit and
accessories for any signs of
transit damage, once you have
unpacked it. Please read the
operating instructions carefully
before starting to use the unit.
Keep the documentation
somewhere safe for future
reference.
If the unit shows any signs of
damage or has come into
contact with any fluids should
not be connected to a power
supply.
Only use the power cable
supplied. Before connecting the
power, the power supply and
unit connection values (power
voltage, frequency) must be
checked. The fuse used in the
unit must conform to the factory
definitions contained in the
“Technical data” section of this
manual.
!