Resetting your headset, Led status information, Resetting your headset led status information – RocketFish RF-BTHP01 User Manual
Page 10
10
RF-BTHP01 Bluetooth Stereo Headset
Resetting your headset
To reset your headset:
• Press
(play/pause),
, and
at the same time.
Note:
The pairing information is retained. When you turn on
your headset, it automatically connected to the last
connected device.
LED status information
Headset status
LED
Powering on
Blue LED is on.
Powering off
Red LED dims, then disappears.
Low battery
Red LED continues to blink.
Recharging
Red LED stays on.
Recharging complete
Blue LED stays on.
Pairing mode
Blue and red LED flash rapidly.
Connection complete
Blue LED blinks every three seconds.
Receiving a call
Blue LED flashes rapidly.
Talking on the phone
Blue LED repeatedly brightens and dims.
Playing music
Blue LED repeatedly brightens and dims.
RF-BTHP01_09-0818_MAN_V1_English.fm Page 10 Friday, September 18, 2009 3:15 PM