Rosewill RNX-N400LX User Manual
Wireless router rnx-n400lx user manual
Advertising
Table of contents
Document Outline
- Table of Contents
- Before We Begin
- 1 Introduction
- 2 Setup
- 3 RNX-N400LX Web Management page
- 3.3 Wireless
- 3.4 TCP/IP Settings
- 3.41 LAN Interface
- 3.42 WAN Interface Setup
- 3.424 WAN Interface Setup – PPTP
- 3.5 Firewall
- 3.6 QoS
- 3.7 Management
- Appendix A – FREQUENTLY ASKED QUESTIONS (FAQ)
- 1.What is and how to find my Computer’s IP and MAC address?
- 2.What is Wireless LAN?
- 3.What are ISM bands?
- 4.How does wireless networking work?
- 5.What is BSSID?
- 6.What is ESSID?
- 7.What are potential factors that may causes interference?
- 8.What are the Open System and Shared Key authentications?
- 9.What is WEP?
- 10.What is Fragment Threshold?
- 11.What is RTS (Request to Send) Threshold?
- 12.What is Beacon Interval?
- 13.What is Preamble Type?
- 14.What is SSID Broadcast?
- 15.What is Wi-Fi Protected Access (WPA)?
- 16.What is WPA2?
- 17.What is 802.1x Authentication? Protocol (TKIP)?
- 18.What is Temporal Key Integrity Protocol (TKIP)?
- 19.What is Advanced Encryption Standard (AES)?
- 20.What is Inter-Access Point Protocol (IAPP)?
- 21.What is Wireless Distribution System (WDS)?
- 22.What is Universal Plug and Play (UPnP)?
- 23.What is Maximum Transmission Unit (MTU) Size?
- 24.What is Clone MAC Address?
- 25.What is DDNS?
- 26.What is NTP Client?
- 27.What is VPN?
- 28.What is IPSEC?
- 29.What is WLAN Block Relay between Clients?
- 30.What is WMM?
- 31.What is WLAN ACK TIMEOUT?
- 32.What is Modulation Coding Scheme (MCS)?
- 33.What is Frame Aggregation?
- 34.What is Guard Intervals (GI)?
- Appendix B – Product Specification