Roland VP-7 - Manual (Page 12)

12
Connecting Headphones or Speakers
The VP-7 does not contain speakers. In order to hear sound, you’ll need to connect it to an audio device, such as monitor speakers
or a stereo system, or connect headphones.
NOTE
921
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Connecting monitor speakers
or a stereo system
Use cables to connect the VP-7’s rear panel
OUTPUT jacks to your monitor speaker or
stereo set.
* In order to take full advantage of the VP-
7’s capabilities, we recommend that you
use it in stereo .
* To use it in mono, connect to the OUTPUT
L/MONO jack .
Monitor speakers (with built-in amp)
INPUT
Audio
Cable
OUTPUT
Using headphones
Connect commercially available head-
phones to the Headphone jack.
* Sound will be output from the OUTPUT
jacks even if headphones are connected .
Headphones
Headphone Jack
(Stereo miniature phone type)