Radio Shack PLRDVD7 - Manual (Page 16)

MENU FUNCTION
Press the MENU button on the unit or on
the remote control during DVD, AV mode
to display the adjustment items on the
screen.
Press MENU button repeatedly to
select among BRIGHT, CONTRAST,
COLOR and TINT (For the unit with NTSC
system) items and etc. Press VOL+/VOL-
buttons on the unit or VOLUME +/-
buttons on the remote control to adjust
the corresponding item.
Note: When you set the TV TYPE item
to “PAL” in “PREFERENCES SETUP”,
there is no “TINT” item to display.
The TRANSMIT item is effective when
the unit has the infrared transmitting
function. In TRANSMIT item, there is ON
or OFF to be selected. When set it to ON,
the sound signal can be emitted from the
infrared transmitting window on the unit
and you can use the infrared wireless
headphone to hear the sound signal.
In SCREEN item, you can select
appropriate TV aspect ratio (4:3 or 16:9)
using the VOL +/VOL- buttons on the unit
or VOLUME +/- buttons on the remote
control.
ON-SCREEN DISPLAY FUNCTION
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example:
DVD:
(1) Press DISPLAY for the first time:
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
(2) Press DISPLAY for the second time:
(3) Press DISPLAY for the third time:
(4) Press DISPLAY for the fourth time:
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
VCD:
(1) Press DISPLAY for the first time:
TITLE 01/03 CHAPTER 002/025
00:02:25
CHAPTER REMAIN
00:01:39
CHAPTER ELAPSED
00:00:24
TITLE REMAIN
01:46:58
OPERATION
MENU
BRIGHT 20
CONTRAST 25
COLOR
45
TINT 10
TRANSMIT ON
SCREEN 16:9
SINGLE ELAPSED
00:00:25
16