Rear panel, Dhd controller description – Runco VX-2c User Manual
Page 10
DHD CONTROLLER DESCRIPTION
REAR PANEL
Pb
Pr
Y
Video
3
IR
RS-232 Control
S-Video 1
S-Video 2
HD1
HD2
1
2
Pr
R
Y
G
Pb
B
R
Pr
G
Y
B
Pb
H
V
DVI 1
DVI 2
DVI Out
H/V
V
H
Pr
R
Y
G
Pb
B
H
V
TRIGGERS
RS-232 Out
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
100-230VAC 50-60 Hz, 165 Watts Max
OUTPUTS
INPUTS
SYSTEM CONTROL INTERFACE
Component Video
SDI
Option
Serial No
Video Processor / Controller
Model
Runco International
Union City, CA
Made In USA
2
3
4
7
10
8
14
15
16
17
11
13
1
6
5
12
9
OUTPUTS:
1.
ANALOG OUTPUTS (BNC Connectors) (This output is not used when married to the VX-2c)
The various output lines used to drive the analog input of the display device. Individually, the jacks are: V=vertical
sync, H=horizontal sync, B=Blue, G=Green, R=Red. Connect these to the corresponding projector inputs.
2.
DVI OUT
The DVI digital link used to drive the digital input of an HDCP compliant display device. Connect to the projector’s
DVI inputs.
INPUTS:
3.
DVI 1 (Digital)
DVI input #1, HDCP compliant.
4.
DVI 2 (Digital)
DVI input #2, HDCP compliant.
5.
HD 1 (Analog BNC connectors)
High Definition input #1, can be RGB(HV) or
YPrPb, 480p, 720p, 480i, 576i or 1080i.
6.
HD 2 (Analog BNC connectors)
High Definition input #1, can be RGB(HV) or
YPrPb, 480p, 720p, 480i, 576i or 1080i.
7.
COMPONENT INPUT (RCA connectors)
Standard Definition (480i/576i) Component
(YPrPb) input. This is the input for component
video from sources such as DVD players. (For
best results do not run DVD player in progressive
mode).
8.
COMPOSITE INPUT (RCA connector)
This is the input for Composite Video input from
sources such as Laser disc players, VCRs and other
miscellaneous video sources.
9.
S-VIDEO 1 INPUT
This is the input for S-video #1 from sources such
as Satellite receivers, S-VHS VCR’s and DVD
players.
10.
S-VIDEO 2 INPUT
This is the input for S-video #2 from sources such
as Satellite receivers, S-VHS VCR’s and DVD
players.
11.
TRIGGERS 1/2/3 (Outputs)
Connection for 3 different 12V trigger controlled
devices.
12.
RS-232 OUT (RJ-11 Connector)
For future use.
13.
IR
Wired input from an external remote control.
14.
RS-232 CONTROL
Connection for an external RS-232 controller
device to place the DHD under system automation
control.
15.
POWER INPUT (100-230v)
Plug in main power here.
16.
MAIN FUSE
This is the main AC input fuse. (Main Fuse:
5mm x 20mm, 500mA, 250V, Slow Blow)
17.
MAIN POWER SWITCH
Disconnects or applies main power to the
processor.
9