RCA G27669 - Manual (Page 21)

19
Interactive Setup
SET DVD CHANNEL
1 Not connected
2 Channel 3
3 Channel 4
4 Video Input
2. Point to the choice that matches the way you have your DVD player
connected to the TV.
3. Press MENU or OK to continue.
Setting the SAT/CABLE Channel (auto
tuning)
The next step lets you set the SAT/CABLE channel. When you set the SAT/CABLE
channel, you’re telling the TV what channel to tune to when you press the
SAT•CABLE button on the remote.
Indicate which input you used to connect a satellite receiver or a cable box. If
you don’t have a satellite receiver or cable box connected to the TV, skip this
step or select Not Connected from the SAT/CABLE Channel choice list. (For
more, see Auto Tuning in the Using the Menu System section.)
SETUP
Would you like to use a cable
box or satellite unit with your
TV?
1 Use with cable or satellite
2 Skip this step
1. Press MENU or OK to bring up the SAT/CABLE choice list.
SET SAT/CABLE CHANNEL
1 Not connected
2 Channel 2
3 Channel 3
4 Channel 4
5 Video Input
2. Choose how the TV and satellite receiver or cable box are connected.
3. Press MENU or OK to continue.