RCA M1001GBUS - Manual (Page 14)

EN
5
Before You Begin
Connecting the Player to
your computer
1. Press and hold the lock button on the
back of the player and slide the USB
connector out from the
player.
2. Insert the USB connector of the player
into the USB port on the computer
tightly (use the included USB extension
cable if necessary).
Selecting between USB and
battery charging mode
Selecting USB mode lets you transfer files
to the player while charging mode lets
you charge the unit. This player uses an
internal (Lithium polymer) battery that
can be charged with a PC.
1. Turn on your PC.
2. Connect the player to your PC (use
the included USB extension
cable if necessary)
3. The player will be in USB mode
automactically for file transfer. Press
and hold to switch to charging
mode.
4. In charging mode, press and hold
to switch the player to USB
mode.
Note
You may stop charging the
player when the display shows
“Battery full”.
Note
Refer to the Software
Instruction manual for procedures in
setting up USB drivers and
transferring files to the player.
USB Connected
Hold to charge batt.
Battery Charging
Hold to enter USB
Tip
You can still transfer files
to the player in the battery
charging mode.