ritetemp 8035C - Manual (Page 7)

PG
11
PG
12
STEP 1 - Connect the R
(or RH) wire to the RH
terminal on the thermostat.
This connects the Heater
Power to the thermostat.
STEP 2 - Connect the W wire to the W
terminal on the thermostat.
This connects the heater control line to
the thermostat.
Your Heater is now connected to the thermostat.
STEP 1 - Connect the
R (or RH) wire to the
RH terminal on the
thermostat. This
connects to the Heater
Power .
STEP 2 - Connect the W wire to
the W terminal on the thermostat.
This connects the heater control
line to the thermostat.
STEP 3 - Connect the G wire to the G terminal on the
thermostat.
This connects the Fan to the thermostat.
Your system is now connected to the thermostat.
Return To Page 9
Return To Page 9
2 WIRE Heating
(GAS MILLIVOLT or 24vac
NOTE: Wires marked with the dotted line are optional.
NOTE: Wires marked with the
dotted line are optional.
jumper
wire
FURNACE
HEAT
Thermostat
R W C
HEAT
Power
W
RH
R
or
From Furnace
C
RH
W
C
From Furnace
G
or R
A
3 WIRE
FURNACE
jumper
wire
Heat
Power
Heat
W G RH C
FAN
Thermostat
A