Roland HP109-PE - Manual (Page 29)

Chapter 4. Recording Your Performance
27
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
Start recording
6. Recording will start when you either press the
[Play] button or play the keyboard.
Two measures of the count sound are played, and the
recording begins.
Note that recording will also begin as soon as you play
anything on the keyboard, even if you do not press the
[Play] button. There is no count sound played when you
start in this manner.
When recording begins, the [Play] button and [Rec] button
indicators will light.
Go ahead and perform on the keyboard.
Stop recording
7. Press the [Play] or [Rec] button.
Recording will stop, and the indicators for the [Play] and
[Rec] buttons will go dark.
Play back the recorded performance
8. Press the [Play] button.
You will hear the recorded performance.
Once again press the [Play] button, and playback will stop.
Recording Along with a Song
You can record a performance that you play along with a
built-in song.
Using the [Left] or [Right] buttons, you can (for example)
perform and record just the right-hand part of a song
while listening to the left-hand playback of a built-in song.
Selecting the song to record
1. Press the [Song/Tempo] button, getting its indica-
tor to light in red.
The display will indicate the song number.
2. Use the [-] or [+] button to select the song that you
want to play.
3. As necessary, set the metronome and tempo (p.
22).
4. Press the [Rec] button.
The [Rec] button’s indicator will light.
Selecting the track to record
5. Press the [Left] or [Right] button.
When you want to record the left-hand performance, press
the [Left] button; to record that of the right hand, press the
[Right] button.
The indicators of the button you pressed and of the [Play]
button will blink, and the HP109-PE enters recording-
standby mode.
Starting to record
6. Press the [Play] button.
Recording begins after two measures of count sound.
Play along with the song.
Stop recording
7. Press the [Play] or [Rec] button.
Recording will stop, and the indicators for the [Play] and
[Rec] buttons will go dark.
The recorded performance is stored in “USr (User).”
Play back the recorded performance
8. Press the [Play] button.
You will hear the recorded performance.
Once again press the [Play] button, and playback will stop.
About the “USr” display
When you stop recording, the “ ” display will
change to “ .”
The “.” in the lower right of the display indicates that
there is already a recorded performance.
If you record without specifying the recording track, the
performance will be recorded to the [Right] button.
If you want to record the right and left hands separately
on separate recording tracks, refer to “Selecting and
Recording the Track for Each Hand Separately” (p. 28).
The HP109-PE includes a “Song Backup function” (p.
32), which allows you to store the song recorded with the
HP109-PE in the instrument itself.
If “dEL” appears in the display, refer to p. 26.
2 5 3 6,8 4,7 1