Raritan Computer CS-PENT - Manual (Page 10)

4 CS-PENT U SER G UIDE
4. Power ON the connected computer. On the CS-PENT front panel, the light above the [SKIP]
button will be ON, and the light above the connected channel button number will also be ON,
indicating that CS-PENT is powered ON.
Note: CS-PENT is automatically powered ON as soon as at least one connected computer is
manually powered ON.
5. The video from the connected computer will be displayed on the monitor. When boot-up is
complete, check keyboard and mouse operation. Operate the keyboard and mouse as if they
were connected directly to the computer.
6. After you have verified operation of one computer, connect the remaining PCs following
steps 2–4. You may now begin using the CS-PENT unit.
Figure 7 Cabling Details
Installation Notes
1. Connections are provided for either a 6-pin PS/2-style or a 5-pin Extended AT-style keyboard.
Do not connect both keyboards simultaneously.
2. You may simultaneously connect PS/2 and AT computers to CS-PENT with the appropriate
cables. However, only a PS/2 mouse can be used with CS-PENT to operate the computers.