Power requirements, Mechanical interfaces, Visual indicators (leds) – Riverstone Networks OAW-AP65 User Manual

Page 17

Advertising
background image

17

Alcatel-Lucent | OmniAccess AP

OAW-AP65
• 1 x 10/100 Base-TX (RJ-45) auto-sensing

Ethernet interface

• Auto-sensing MDI/MDX

• PoE 48VDC / 220mA power over Ethernet

(802.3af compliant)

• Supports Serial over Ethernet

• Rear Mounted

• 1 x 5V DC External Power Interface

OAW-AP70
• 2 x 10/100BaseTX RJ-45 auto-sensing

Ethernet interfaces (Port 0)

• Auto-sensing MDI/MDX

• PoE 48V DC / 250mA power over Ethernet

(802.3af compliant)

• Serial over Ethernet (Port 1)

• Auto-sensing MDX

• PoE 48V DC / 250mA power over Ethernet

(802.3af compliant)

• Redundant Ethernet data link and power

over Ethernet

• USB ver2.0 interface

• 1 x 5V DC power interface

OAW-AP80
• 1 x 10/100 Base-TX auto-sensing Ethernet

interface (IP67 8-pin male (pole) M12 circular
DIN connector (Au) contacts)

• Auto-sensing MDI/MDX

• PoE 48V DC / 1.2A (30W) power over

Ethernet (non-standard 802.3af)

• Integral lightning arrester

• 1 x 2.4 Ghz N-Type Female Antenna Interface
• 1 x 5 Ghz N-Type Female Antenna Interface
• 1 x Electrical Ground / Safety Terminal
• 1 x Integral ENET lightening arrester

OAW-AP80
• (Ready) Power on/off (provided on Power injector)

Power Requirements

OAW-AP41
• 48V DC / 200mA power-over-Ethernet

(802.3af compliant)

OAW-AP60
• External AC power or POE

• 5V DC / 2A supplied externally via optional

country specific AC adapter kits

• 48V DC / 200mA power over Ethernet

(802.3af compliant)

OAW-AP65
• External AC power or POE

• 5V DC / 2A supplied externally via optional

country specific AC adapter kits

• 48V DC / 220mA Power-over-Ethernet

(802.3af compliant)

OAW-AP70
• External AC power or POE

• 5V DC / 3A supplied externally via optional

country specific AC adapter kits

• 48V DC / 250mA power over Ethernet

(802.3af compliant)

OAW-AP80
• Access Point power draw - 48V DC / 1.2A

(30W) Power-over-Ethernet (non-standard
802.3af)

• External Power Injector, auto-sensing 100-

240V AC Input, 1.5A Output 48 VDC, 1.2A
(30W) (provided)

Mechanical Interfaces

OAW-AP41 MECHANICAL INTERFACES
• Wall-mount lugs

OAW-AP60 AND AP61 AND OAW-AP70
• Standard Kensington MicroSaver security

cable interface (not supplied)

• Optional wall and ceiling mount kit interface

OAW-AP65
• 1 x Integrated ceiling tile rail snap-in mount

(for 15/16” diameter rails). Located on rear
of device

• 1 x Kensington locking interface

OAW-AP80
• 4 x Mounting Bracket Points

• Ruggedized wall, pole or mast mount

hardware provided (articulating in horizontal
and vertical planes)

Visual Indicators (LEDs)

OAW-AP41
• (Ready) Power on/off/booting

• (ENET) Link status / activity

• (WLAN A) IEEE 802.11a status

• (WLAN G) IEEE 802.11b/g status

OAW-AP60 AND AP61 AND OAW-AP70
• (Ready) Power on/off

• (Ethernet) link status / activity

• (Radio mode) 802.11a and b/g AP /air

monitor mode

OAW-AP65
• (Ready) Power on/off/booting

• (Ethernet 0) link status / activity

• 802.11a + b/g Wireless Access Point

• 802.11a + b/g Wireless Air Monitor

Advertising
This manual is related to the following products: