Runco pmn - Manual (Page 30)

P. SET
Use for entering a sub-menu when selected by high light.
Q. MUTE
Used to mute the sound system.
R. VOLUME -
Used to reduce the volume of the sound system.
S. VOLUME +
Used to reduce the volume of the sound system.
T. INSTALLER ADJUST - svc (pin hole)*
Used to access the INSTALLER ADJUST MENU.
PLASMA SERVICE REMOTE CONTROL
29
SDTV-1 SDTV-2 DIGITAL IN
HDTV-2 PC/HDTV-1
POWER ASPECT
RATIO
RGB
SETUP
INFO
1 2
3 4
MENU MAGNIFY
SET
-
+
MUTE VOLUME
A
D
G
J
C
F
B
I
K
R
S
Q
P
E
H
L, M, N, O
T (svc)*
A. ASPECT RATIO
Press to change the aspect ratio or geometry of the image.
Different resolutions will allow for different aspect ratios.
B. RGB SETUP
When entering a computer-type (VESA) signal, press to
automatically center and resize the image.
C. POWER
Press to cycle the monitor between on and standby.
D. PC/HDTV-1
Selects the 15-pin D-sub input for computer-type (VESA)
signals or HDTV signals.
E. HDTV-2
Selects the computer DVI input.
F. INFO
While video is being displayed, this will display timing
information about the selected signal.
G. SDTV-1
Selects the first standard definition input, either S-Video
or Composite video based on the toggle button.
H. SDTV-2
Selects the second standard definition input, for interlaced
component video input.
I. DIGITAL IN
Selects the digital video from the DVI input.
J. MENU
Activate or de-activate the menu.
K. MAGNIFY
Zooms in on the image, particularly useful for computer-type
(VESA) images.
L. UP
Scrolls the highlight bar in the menu up.
M. LEFT
Used for scrolling left, particularly during adjustment menus.
N. RIGHT
Used for scrolling right, particularly during adjustment
menus.
O. DOWN
Scrolls the highlight bar in the menu down.
NOTE: FOR DEALER USE ONLY