RCA Scenium D44LPW134 - Manual (Page 13)

Connections & Setup
Chapter 1 11
VID1
VID2
COMPOSITE INPUTS
S-VIDEO V R L
V R L
COMPOSITE INPUTS Lets you connect another component such as a VCR, DVD player, or
laserdisc player. Its AUDIO jacks are the same as described for CMP1 above.
• VID1 S-VIDEO Provides better picture quality than the video jacks (VID1 and 2 Video)
because the color part of the picture is separated from the black and white part of the
picture. When using VID1 S-VIDEO, make sure to connect left and right audio cables to
the VID1 L/MONO and R Audio Input jacks.
• VID1 V (Video) Provides composite video connection. The video connector is usually
yellow.
• VID1 L/R (Audio) Provides left and right audio connections. The left audio connector
is usually white, and the right audio connector is usually red.
• VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a component
such as a VCR, DVD player, or laserdisc player. Their description is the same as VID1
above.
Note: For each VID jack group (VID1 and VID2), you may connect either an S-Video or
Video cable. Do not connect both at the same time in either of the VID jack groups.
DVI-HDTV Input Lets you connect an HDTV Tuner with a DVI output.
• DVI (Digital Visual Interface) Provides an uncompressed, digital video interface
developed for high-bandwidth digital connection. It supports the overlay of high-
resolution graphics needed by some electronic program guide navigation and other
interactive services. DVI, when combined with HDCP (High bandwidth Digital
Content Protection) technology, creates a protected digital connection. The DVI-HDTV
connection is designed to display either progressive scan (480p or 720p) or HDTV
(1080i) signals at a bandwidth of up to 1.78 Gigabits per second.
• L (Audio)/R (Audio) Provides left and right audio connections when using the DVI
jack. The left audio connector is usually white, and the right connector is usually red.
Note: Remember to connect the left and right audio cables because the DVI cable
carries only the picture signal, not the sound.
Wired IR This jack is for connecting a wired remote control system, which is primarily for
professional installers. If you’re using the remote that was included with your TV, don’t plug
anything into this jack.
DVI-HDTV
R
L
Wired
IR
Front Input Jacks
The TV has front input jacks for convenience in connecting a camcorder, digital camera, or video game system. Look for
a hinged door and press to open the cover. Please note the illustration below is just an example of how these jacks might
appear.
MEN U CH CH VO L — VO L + PO WER
HEADPHONE
L/MONO R IN IN
AUDIO IN VIDEO S-VIDEO
PHONES Allows you to connect headphones to listen to the sound coming
from the TV. To adjust volume control of the headphones, press the VOL+
or VOL- button (the volume display appears). Press the arrow up or down
button (the headphone volume display appears), then press the right or left
arrow button to adjust the headphone volume.
VIDEO (in) Receives video from another component, such as a camcorder,
video game console, or VCR.
L/MONO and R AUDIO Receives audio from another component, such as a
camcorder, video game console, or VCR.
S-VIDEO (in) Allows you to connect an S-Video cable from another
component. Make sure you also connect audio cables from the component to
the TV.
Notes: When you plug in headphones, the TV’s internal speakers are muted.
Use the VOL up or down button to control the volume.
When connecting a component that uses a monaural cable, such as some
camcorders, use the L/MONO input jack to get sound from both speakers.