Rikaline GPS Kit - Manual (Page 4)

P O W E R A N D C H A R G E Y O U R P D A
5
Cigarette Lighter Adapter
Plug into the
DC input port
How to Power your cradle and charge your PDA?
This GPS Ready Mount comes with a cigarette lighter adapter. To power the cradle, simply plug the cigarette
lighter adaptor into 12V DC input port on the cradle.
The cradle can also be hard-wired directly into the car’s electrical system with optional hardwire cable
To charge your PDA, slide your PDA into the PDA holder. It will then be charged automatically. The charging light
on PDA should be on when PDA is being charged. If not, make sure PDA and PDA holder connector is properly
connected.
G P S R E A D Y M O U N T C O N N E C T I O N
6
GPS Ready Connection (For Wired GPS receiver users only)
Seidio GPS Ready Mount has a built-in RJ-11 connector on top of the cradle. You can plug your receiver directly
to the cradle for charging and connecting to your PDA for navigation. GPS receivers with connectors other than
RJ-11 need an additional GPS adaptor cable. The LED light on the receiver should be on when the receiver is
properly connected to the cradle
Supported Mouse GPS Receivers:
Seidio HaiCom Holux
TomTom iTrek Rikaline
Leadtek GlobalSat
The GPS adaptor for other models will be available soon. Please check with seidio site for update