Rosen Entertainment Systems CAR SHOW 7 - Manual (Page 9)

9
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
as indicated.
3. Close the cover
Battery: one button cell lithium
battery, CR2025.
Using the Remote Control
Point the remote control towards the
base of the unit.
Operation angle: About ± 30 degrees in
each the direction of the base of the unit.
LOADING/EJECTING A DISC
Ejecting a Disc
Press (EJECT) button (3) to eject the
disc.
Loading a Disc
When you have installed the unit and all
connections have completed, you can
load a disc as follows:
1. Press the OPEN button (1), to release
and turn on the monitor.
2. Insert the disc with printed side facing
up into the disc slot (2).
3. The player will start playback
automatically.
2
1
3