P. 96, P. 96)), Usb audio on / off (keyboard : a) – Roland PCR-1 User Manual
Page 96: Usb audio mode setting (keyboard : b)
96
System settings
USB AUDIO ON / OFF (Keyboard : A)
The USB AUDIO ON/OFF setting will take effect when you reconnect the USB cable.
Perform steps 1–3.
fig.hyo
4.
Use the
[DEC] [INC]
buttons or the
[0]
or
[1]
keys to switch USB AUDIO ON
/ OFF.
The display will indicate either “ON” or “OFF”.
5.
Press the
[ENTER]
button.
USB AUDIO MODE SETTING (Keyboard : B)
The USB AUDIO ON/OFF setting will take effect when you reconnect the USB cable.
Perform steps 1–3.
4.
Use the
[DEC] [INC]
buttons or the
[0]
-
[5]
keys to switch USB AUDIO SAMPLING
FREQUENCY or DRIVER MODE.
5.
Press the
[ENTER]
button.
0
44.1kHz
(ADVANCE)
Advanced mode
The special driver will be used, allowing audio to be re-
corded/played with high quality and stable timing. In
Advanced mode, audio signals can be transferred be-
tween the PCR-1 and the computer at a resolution of
24
bits
and sampling frequencies of
44.1 / 48 / 96 kHz
. Se-
lect this mode if you are using an application that al-
lows high-quality audio recording/playback, such as
an application that supports 24 bit audio or an ASIO-
compatible application. We recommend that you nor-
mally use this mode.
1
48kHz
(ADVANCE)
2
96kHz PLAY
(ADVANCE)
3
96kHz REC
(ADVANCE)
4
44.1kHz
Standard driver mode
The standard driver provided by the operating system
will be used. Audio data will be transferred between the
PCR-1 and your computer with
16-bit
depth and a sam-
pling frequency of
44.1/48 kHz
.Use this setting if you
are using the Mac OS 9 sound manager.
5
48kHz
0
OFF
1
ON
PCR-1_e1.book 96 ページ ２００３年１１月２０日 木曜日 午後３時２２分