Roland HPi-6s - Manual (Page 57)

57
Adding Variety to Your Performances
1.
Simultaneously press two of the Tone buttons.
Both of the button indicators will light. Of the two buttons, the sound of the left button
will be “Tone 1,” and the sound of the right button will be “Tone 2.”
Changing the Tone
1.
Press the cursor left or right button to select “Tone 1” or “Tone 2.”
2.
Press the cursor up or down button to select the tone.
When the tone names of “Tone 1” or “Tone 2” are highlighted, you can press the
Cursor button to select tones within the same tone group.
Adjusting the Volume Balance (Dual Balance)
You can change the volume balance between the two layered sounds in Dual
performance.
1.
Press the cursor left or right button to select “Dual Balance.”
2.
Press the cursor up or down button to adjust the dual balance.
The volume balance changes.
Cancelling Dual Performance
1.
Press any tone button.
Now you’ll hear only the sound of the button you pressed.
Playing Two Sounds Layered Together (Dual)
Simultaneously playing two sounds when one key is pressed is called “Dual Performance.”
NOTE
You can’t use Dual Performance
if the Twin Piano function is on.
Dual Balance
Displays the volume
ratio of the two selected
tones.
Tone 1
Displays the tone name
for the left Tone button
that is selected. Tone 2
Displays the tone name
for the right Tone button
that is selected.
HPi-6S-e.book 57 ページ ２００７年１１月１９日 月曜日 午前１０時３６分