Ryobi D550H - Manual (Page 6)

6
SPECIFICATIONS
UNPACKING
INSTRUCTIONS
Your hammer drill has been shipped completely
assembled.
■ Carefully remove the tool from the box. Make sure
that all items listed in the packing list are included.
■ Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
■ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
APPLICATIONS
You may use your hammer drill for the purposes listed below:
■ Hammer drilling in concrete, brick, or other masonry.
■ Drilling in wood.
■ Drilling in ceramics, plastics, fiberglass, and laminates.
■ Drilling in both soft and hard metals.
■ Using driving accessories, such as driving screws with screwdriver bits.
■ Mixing paint.
Chuck Capacity 5/64 in. (2 mm) - 1/2 in. (12.7 mm)
Hammer Speed Low (0-16,000 BPM*) & High (0 - 48,000 BPM*)
No Load Speed Low (0 - 1,000/min) & High (0 - 3,000/min)
Input 120 Volts, 60 Hz, AC only, 5.5 Amps
Net Weight 5.75 lbs. (2.6 kg)
* BPM = Blows Per Minute
PACKING LIST
Hammer Drill
Carrying Case
Operator’s Manual
WARNING:
If any parts are missing do not operate your tool until
the missing parts are replaced. Failure to do so
could result in possible serious personal injury.