Roland V-Studio VS-20 - Manual (Page 16)

16
Installation and Registration
• Use a USB cable to connect your computer to the VS-20 Hardware.
• Connect your audio output devices such as headphones or speakers to the VS-20 Hardware.
* This package does not include sound reproduction equipment such as headphones or speakers.
You must connect headphones or monitor speakers as shown in the illustration, monitor the playback audio from the
V-STUDIO 20.
921
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
Connecting your audio equipment
Before connecting the VS-20 Hardware to a computer, read the Installing the VS-20
Driver (p. 11) and install the VS-20 driver on the computer. If the driver is not installed,
Guitar Tracks 4 cannot be operated correctly from the computer.
Monitor amplified speakers
Headphones
Computer
USB
Cable
VS-20_e.book 16 ページ ２０１０年１月１８日 月曜日 午前９時８分