Viewing a list of attached devices, Managing the configuration file, Your configuration file, see – RadioLAN WNR834B User Manual
Page 90: Managing the configuration
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
7-6
Using Network Monitoring Tools
v1.2, January 2007
Viewing a List of Attached Devices
The Attached Devices table contains a table of all IP devices that the router has discovered on the
local network. From the main menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table.
For each device, the table shows the IP address, NetBIOS Host Name or Device Name (if
available), and the Ethernet MAC address. To force the router to look for attached devices,
click Refresh.
Managing the Configuration File
The configuration settings of the WNR834B are stored within the router in a configuration file.
You can back up (save) this file to your computer, restore it, or reset it to the factory
default settings.
Figure 7-4
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.