Radio Shack PT4000 User Manual

Page 4

Advertising

4 – PYLE PRO PT3200/4000 Amplifier Owner’s Manual

PYLE PRO PT3200/4000 Amplifier Owner’s Manual - 5

PYLE

PRO

Audio,

Inc.

1600

63rd

Street

Brooklyn,

11204

Place

Stamp

Here

All PYLE PRO products are carefully constructed and tested before shipment.

Units purchased in the USA are warranted to be free of defects in material

and workmanship for two (2) years from the date of purchase. This warranty

is limited to the original retail purchaser of the amplifier.

Should the unit fail due to factory defects in material or workmanship, your

unit will be repaired or replaced at the sole discretion of PYLE.

To obtain warranty service, you must first call our Consumer Return Hotline

at (718) 236-6948 to obtain a Return Authorization Number. This R.A. # must

appear on the outside of your package and on all paperwork relating to your

return.

When returning the unit to us for warranty service, it must be carefully packed

and shipped, prepaid, to:

R.A.#: _____________

PYLE PRO Service Center

1600 63rd Street

Brooklyn, NY 11204

You must also include the following items with your return:

• A copy of your sales receipt or other proof of purchase

• A brief letter, indicating the problem you are experiencing with the

product

• Include in your letter your return address, daytime phone number and

R.A. number

• Also include a check or money order for $15.00 for return shipping,

handling and insurance, or provide your Visa/MC number with

expiration date.

Our obligation under this warranty is limited to the repair or replacement of

the defective unit when it is returned to us prepaid. This warranty will be

considered void if the unit was tampered with, improperly serviced or subject

to misuse, neglect or accidental damage.

Limited Warranty

Amplifier Specifications
Input Impedance, balanced (unbalanced)

Continuous Output Power

Stereo Mode

20 Hz to 20 kHz, 8 Ohms
1 kHz, 4 Ohms
Maximum Power, 8 Ohms
Maximum Power, 4 Ohms
Peak Power, 8 Ohms

Bridged Mode

20 Hz to 20 kHz, 8 Ohms
1 kHz, 8 Ohms
Peak Power

THD

at rated output power

Frequency Response

+/– 3 dB

Input Sensitivity

for rated output power

Signal-to-Noise Ratio

A-Weighted

Speaker Impedance

Stereo
Bridged

Power Requirement

Dimensions

H x W x D, inches

(mm)

Weight, lbs (kg)

20 k-Ohms (10 k-Ohms)

200W x 2

300W x 2

230W x 2

350W x 2

1600W x 2

500W x 1

600W x 1

3200W x 1

0.1%

10 Hz to 50 kHz

1.0V

100 dB

4-16 Ohms

8-16 Ohms

120 VAC, 60 Hz

15/32

x 19 x 14

(88 x 482 x 355)

30.6 (13.96)

20 k-Ohms (10 k-Ohms)

260W x 2

400W x 2

300W x 2

450W x 2

2000W x 2

700W x 1

800W x 1

4000W x 1

0.1%

10 Hz to 50 kHz

1.0V

100 dB

4-16 Ohms

8-16 Ohms

120 VAC, 60 Hz

15/32

x 19 x 14

(88 x 482 x 355)

33.0 (15.1)

PT3200

PT4000

Caring for your Pyle Pro Amplifier

Your Pyle Pro Amplifier is an example of superior design

and craftsmanship. The following suggestions will help you

care for your amplifier so you can enjoy years of use:

• Keep the amplifier dry. If it gets wet, wipe immediately.

• Use the amplifier only in well-ventilated installations.

• Handle the amplifier gently and carefully - do not drop!

• Keep the amplifier away from dust and dirt.

• Wipe occasionally with a damp cloth to keep it looking

new. Do not use harsh chemicals, solvents or

detergents!

Resetting the circuit breaker

This amplifier employs a circuit breaker for protection from

power surges and short circuits. If the amplifier suddenly

turns off or will not turn on, check the circuit breaker. If

it is tripped, check and correct for a short or overload

condition. Wait for the amplifier to cool, then press the

circuit breaker RESET button on the back of the amplifier.