RCA 26730 - Manual (Page 6)

6
D
ESKTOP
I
NSTALLATION
CAUTION: Use only the Thomson 5-2455 (black)/ 5-2454 (white)
power supply that came with this unit. Using other adapters may damage
the unit.
1. Place the handset in the base.
2. Set the RINGER switch on the handset to ON.
3. Raise the base antenna.
4. Plug the power supply cord into the base and then into an AC outlet.
The CHARGE/IN USE light comes on indicating that the battery is
charging.
Allow the phone to charge for 12 hours before using the first
time. If you don't charge the phone properly (for 12 hours)
when you first set up the phone, perfomance of the battery will
be compromised.
5. After charging, connect the telephone cord to the phone and then to the
wall jack.
1
4
3
5
NOTE: For
desktop charging
only,
the handset
is able to charge
facing up or
down.
NOTE : The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see “Tone/Pulse Dialing. If you don’t know which type
of service you have, check with the phone company.
2