Roland Digital Piano FP-7F - Manual (Page 28)

28
● 015f: Stereo Delay5
This is a stereo delay.
No Parameter Value Description
1 Delay Left Mode 0-1 ms, note
When this is set to “note,” the
effect is synchronized with the
tempo.
2 Delay Left 0-127 0-1270 ms
Adjusts the time until the delay
sound is heard. (Hz)
3 Delay Left 0-21 note
Adjusts the time until the delay
sound is heard. (note)
4 Delay Right Mode 0-1 ms, note
When this is set to “note,” the
effect is synchronized with the
tempo.
5 Delay Right 0-127 0-1270 ms
Adjusts the time until the delay
sound is heard. (Hz)
6 Delay Right 0-21 note
Adjusts the time until the delay
sound is heard. (note)
7 Phase Left 0-1
8 Phase Right 0-1
Normal,
Inverse
Phase of the delay sound
9 Feedback Mode 0-1 Normal, Cross
Selects the way in which delay
sound is fed back into the effect.
(See the figures above.)
10 Feedback #1 49-89 0 - +80%
Adjusts the amount of the delay
sound that’s fed back into the
effect.
11 HF Damp 0-17
200-8000 Hz,
Bypass
Adjusts the frequency above which
sound fed back to the effect is
filtered out. If you don’t want to
filter out any high frequencies, set
this parameter to Bypass.
12 Low Gain 0-30 -15 - +15 dB Gain of the low frequency range
13 High Gain 0-30 -15 - +15 dB Gain of the high frequency range
14 Balance #2 0-100
D100:0W -
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
15 Level 0-127 0-127 Output level
● 0150: Monaural Delay
A delay that provides a long delay time.
No Parameter Value Description
1 Delay Mode 0-1 ms, note
When this is set to “note,” the
effect is synchronized with the
tempo.
2 Delay Time 0-127 0-2540 ms
Delay time from when the original
sound is heard to when the delay
sound is heard (Hz)
3 Delay Time #1 0-21 note
Delay time from when the original
sound is heard to when the delay
sound is heard (note)
4 Phase 0-1
NORMAL,
INVERSE
Phase of the delay (NORMAL: non-
inverted, INVERSE: inverted)
5 Feedback 49-89 0 - +80%
Proportion of the delay sound that
is to be returned to the input
6 HF Damp 0-17
200-8000 Hz,
Bypass
Frequency at which the high-
frequency content of the delayed
sound will be cut (Bypass: no cut)
7 Pan 0-127 L64 - 63R Panning of the delay sound
8 Low Gain 0-30 -15 - +15 dB
Amount of boost/cut for the high-
frequency range
9 High Gain 0-30 -15 - +15 dB
Amount of boost/cut for the high-
frequency range
10 Balance #2 0-100
D100:0W -
D0:100W
Volume balance of the original
sound (D) and the delay sound (W)
11 Level 0-127 0-127 Output volume
● 0151: Modulation Delay
Adds modulation to the delayed sound.
No Parameter Value Description
1 Delay Left Mode 0-1 ms, note
When this is set to “note,” the
effect is synchronized with the
tempo.
2 Delay Left 0-127 0-1270 ms
Adjusts the time until the delay
sound is heard. (Hz)
3 Delay Left 0-21 note
Adjusts the time until the delay
sound is heard. (note)
4 Delay Right Mode 0-1 ms, note
5 Delay Right 0-127 0-1270 ms
6 Delay Right 0-21 note
Settings of the Delay R The
parameters are the same as for the
Delay L.
7 Feedback Mode 0-1 Normal, Cross
Selects the way in which delay
sound is fed back into the effect
(See the figures above.)
8 Feedback 49-89 0 - +80%
Adjusts the amount of the delay
sound that’s fed back into the
effect.
9 HF Damp 0-17
200-8000 Hz,
Bypass
Adjusts the frequency above which
sound fed back to the effect is
filtered out. If you don’t want to
filter out any high frequencies, set
this parameter to Bypass.
10 Rate Mode 0-1 Hz, note
When this is set to “note,” the
effect is synchronized with the
tempo.
11 Rate 1-127 0.05-10.00 Hz Frequency of modulation (Hz)
12 Rate 0-21 note Frequency of modulation (note)
13 Depth #1 0-127 0-127 Depth of modulation
14 Phase 0-90 0-180 deg Spatial spread of the sound
15 Low Gain 0-30 -15 - +15 dB Gain of the low frequency range
16 High Gain 0-30 -15 - +15 dB Gain of the high frequency range
17 Balance #2 0-100
D100:0W -
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
18 Level 0-127 0-127 Output level
● 0152: Triple Tap Delay
Produces three delay sounds; center, left and right.
No Parameter Value Description
1 Delay Left Mode 0-1 ms, note
When this is set to “note,” the
effect is synchronized with the
tempo.
2 Delay Left 0-127 0-2540 ms
Adjusts the time until the delay
sound is heard. (Hz)
3 Delay Left 0-21 note
Adjusts the time until the delay
sound is heard. (note)
4 Delay Right Mode 0-1 ms, note
5 Delay Right 0-127 0-2540 ms
6 Delay Right 0-21 note
Settings of the Delay R The
parameters are the same as for the
Delay L.
7 Delay Center Mode 0-1 ms, note
8 Delay Center 0-127 0-2540 ms
9 Delay Center 0-21 note
Settings of the Delay C The
parameters are the same as for the
Delay L.
10 Center Feedback #1 49-89 0 - +80%
Adjusts the amount of the delay
sound that’s fed back into the
effect.
11 HF Damp 0-17
200-8000 Hz,
Bypass
Adjusts the frequency above which
sound fed back to the effect is
filtered out. If you do not want to
filter out any high frequencies, set
this parameter to Bypass.
12 Left Level 0-127 0-127 Volume of each delay
13 Right Level 0-127 0-127 Volume of each delay
14 Center Level 0-127 0-127 Volume of each delay
15 Low Gain 0-30 -15 - +15 dB Gain of the low frequency range
16 High Gain 0-30 -15 - +15 dB Gain of the high frequency range
17 Balance #2 0-100
D100:0W -
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
18 Level 0-127 0-127 Output level