Remington HT3218A - Manual (Page 12)

8 |
118036
5 troubleshooting
Note: For additional help, visit our
technical service web site at
www.desatech.com.
WARNING: Unplug trimmer from power source before servicing. Severe
injury or death could occur from fire, electrical shock, or body contact with
moving blades.
Technical Service
You may have further questions about
assembling, operating, or maintain-
ing this hedge trimmer. If so, you can
visit our Technical Service web site at
www.desatech.com or contact our
Technical Service Department at 1-800-
858-8501 (English only). You may also
write to:
DESA Specialty Products™
ATTN: Technical Service Specialty
Products
P.O. Box 90004
Bowling Green, KY 42102-9004
When contacting DESA Specialty Prod-
ucts™, have ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (include copy of
receipt for written requests)
OBSERVED FAULT POSSIBLE CAUSE REMEDY
Motor does not run when you squeeze
trigger switches
1. Both trigger switches are not fully
depressed at the same time
2. Extension cord connection is loose
3. Household circuit breaker is tripped
or open line fuse
1. Fully squeeze both front and rear
trigger switches (see Basic Trimmer
Operation, page 5)
2. Check cord connections
3. Check circuit breaker or line fuse
Motor runs, but cutting blades do not
move
Trimmer damaged. Do not use trimmer Contact DESA Specialty Products™ if still
under warranty
Trimmer smokes during operation Trimmer damaged. Do not use trimmer Contact DESA Specialty Products™ if still
under warranty